Cyrix-i 24/48V- 400A intelligent combiner
Some battery combiners will disconect a battery in case of a short but high amperage load. A battery combiner may also fail to connect a large but discharged battery bank because the DC voltage immediately drops below the disengage value once
the batteries are connected.
The software of the Cyrix-i 12/24-100 does more than simply connect and disconnect based on battery voltage and with a
fixed time delay. The Cyrix-i 12/24-100 looks at the general trend (voltage increasing or decreasing) and reverses a previous
action only if the trend has reversed during a certain period of time. The time delay depends on the voltage deviation from the
12/24V auto ranging
The Cyrix-i 12/24-120 automatically detects system voltage.
No voltage loss
Cyrix battery combiners are an excellent replacement for diode isolators. The main feature is that there is virtually no voltage loss so that the output voltage of alternators or battery chargers does not need to be increased.
Prioritising the starter battery
In a typical setup the alternator is directly connected to the starter battery. The accessory battery, and possibly also a bow
thruster and other batteries are each connected to the starter battery with Cyrix battery combiners. When a Cyrix senses that
the starter battery has reached the connect voltage it will engage, to allow for parallel charging of the other batteries.
Bidirectional voltage sensing and power supply from both batteries
The Cyrix senses the voltage of both connected batteries. It will therefore also engage if for example the accessory battery is
being charged by a battery charger.
The Cyrix-i 12/24-(120-400A) has a dual power supply. It will therefore also close if the voltage on one battery is too low to operate
In order to prevent unexpected operation during installation or when one battery has been disconnected, the Cyrix-i 12/24-
120 will not close if the voltage on one of the two battery connections is lower than 2V (12V battery) or 4V (24V battery).
Parallel connection in case of emergency
The Cyrix can also be engaged with a push button (Cyrix remains engaged during 30s) or a switch to connect batteries in
This is especially useful in case of emergency when the starter battery is discharged or damaged.
New: intelligent battery monitoring to prevent unwanted switching.
Cyrix battery combiner - Cyrix-i 12/24-400 Amp
Continuous current 400 amps
Peak current 2000 during 1 second
Input voltage 12 / 24 volts = 8 - 36 Volts Dc
Current consumption when open <4 mA
Weight kg 0.9
Dimensions H 78 x W 102 x D 110 mm
Estimated delivery time 1-3 days
Guaranteed Safe Checkout